Understanding Net Wrap Sizes: 48″, 51″, 64″, and 67″ Explained
Introduction: Why Net Wrap Size Matters More Than You Think
Walk into any agricultural supply store or browse any farm supply website, and you’ll see net wrap listed in a range of widths — 48 inch, 51 inch, 64 inch, and 67 inch being the most common in the North American market. For a first-time buyer, these numbers can be confusing. For an experienced operator running the wrong size, the consequences range from poor bale coverage to net wrap feeding failures mid-field.
Getting the right net wrap size for your round baler is not complicated — but it does require knowing what each size is designed for, which balers use which width, and what other specifications matter alongside width. This guide covers everything you need to know about North American net wrap sizes, and introduces Xinhui Netting, a professional net wrap manufacturer supplying all four standard widths at factory-direct pricing to farms and distributors worldwide.
How Net Wrap Width Works
Before breaking down each size, it helps to understand the basic principle behind net wrap width selection.
A round baler produces a cylindrical bale. The net wrap is fed across the full width of the bale as it rotates, covering the curved surface from one flat face to the other. The net wrap width must match the bale chamber width of your specific baler model — too narrow, and the bale edges are left exposed; too wide, and the net wrap overhangs and can interfere with the feeding mechanism or cause uneven wrapping.
The rule is simple: net wrap width = bale width.
Most round baler manufacturers specify the correct net wrap width in the operator’s manual. If you’re unsure, check the manual or contact your dealer before purchasing.
The Four Standard North American Net Wrap Sizes
48 Inch Net Wrap — The Most Common Size
Width: 48 inches (approximately 122 cm) Roll Length: 9,840 feet (approximately 3,000 m) — standard for this width Compatible Bale Width: 48 inches
The 48 inch net wrap is the single most widely used net wrap size in North America. It is the standard width for the largest installed base of round balers on the continent, and the width you’ll find most readily available from virtually every net wrap supplier on the market.
Typical baler models using 48″ net wrap:
| Brand | Models (Representative) |
|---|---|
| John Deere | 535, 547, 558, 559, 569 |
| New Holland | BR7060, BR7070, BR7080 |
| Vermeer | 504 Series, 505 Series |
| Kuhn | FB series (NA spec) |
| Case IH | RB series (48″ chamber) |
Key facts about 48″ net wrap:
- Most widely stocked size — available from almost every net wrap supplier
- Widest range of brand options on the market
- Standard roll: 9,840 ft (3,000 m) per roll
- Produces bales approximately 4 feet (122 cm) wide
Who should choose 48″ net wrap: Any operator running a standard North American round baler with a 48-inch bale chamber. If you’re not sure what size your baler takes, and it’s a common North American model, there’s a good chance it’s 48 inches — but always verify in the manual first.
51 Inch Net Wrap — The Mid-Size Option
Width: 51 inches (approximately 130 cm) Roll Length: 9,840 feet (approximately 3,000 m) — standard for this width Compatible Bale Width: 51 inches
The 51 inch net wrap is the second most common size in the North American market. It is used by a distinct set of baler models that produce a slightly wider bale than the 48-inch standard — delivering more forage volume per bale while remaining manageable for most handling equipment.
Typical baler models using 51″ net wrap:
| Brand | Models (Representative) |
|---|---|
| John Deere | 567, 578, 579, 5R Series |
| New Holland | BR7090, Roll-Belt 560 |
| Vermeer | 605 Series, 604 Series |
| Massey Ferguson | 2170 XD, 2190 |
| Fendt | Rotana series (NA spec) |
Key facts about 51″ net wrap:
- Second most common size in North America
- Produces a slightly wider, heavier bale than 48″ models
- Same roll length as 48″ — 9,840 ft (3,000 m) per roll
- More volume per bale than 48″ — efficient for large hay operations
Who should choose 51″ net wrap: Operators running larger-capacity North American round balers where the bale chamber is 51 inches wide. This is common on mid-to-high-capacity balers from John Deere, New Holland, and Vermeer. Again — always confirm with your operator’s manual.
64 Inch Net Wrap — For Large Round Balers
Width: 64 inches (approximately 163 cm) Roll Length: 7,000 feet (approximately 2,134 m) — standard for this width Compatible Bale Width: 64 inches
The 64 inch net wrap steps up into the large round baler category. Balers using this width produce significantly larger bales — more forage per bale, but also more weight per bale, typically requiring a larger tractor and compatible handling equipment. The roll length at this width drops to 7,000 feet (approximately 2,134 m) to keep roll weight manageable.
Typical baler models using 64″ net wrap:
| Brand | Models (Representative) |
|---|---|
| John Deere | 590, 592 |
| New Holland | BigBaler / Roll-Belt series (large chamber) |
| Vermeer | 605N, 654 Series |
| Krone | Comprima series (NA wide spec) |
| Claas | Rollant series (wide NA spec) |
Key facts about 64″ net wrap:
- Used on large-format round balers producing high-volume bales
- Shorter roll length than 48″/51″ — 7,000 ft (2,134 m) per roll
- Produces bales approximately 5.3 feet (163 cm) wide
- Less commonly stocked than 48″ or 51″ — important to plan supply ahead of season
Who should choose 64″ net wrap: Operators running high-capacity round balers with a 64-inch bale chamber, typically on larger commercial farming operations where maximum forage volume per bale is a priority.
67 Inch Net Wrap — Maximum Width for High-Output Operations
Width: 67 inches (approximately 170 cm) Roll Length: 7,000 feet (approximately 2,134 m) — standard for this width Compatible Bale Width: 67 inches
The 67 inch net wrap is the widest standard North American size and is used on the largest round baler configurations available in the market. These balers produce the highest volume bales in the round baling segment — maximizing forage yield per bale at the cost of greater tractor power requirements and more substantial handling equipment.
Typical baler models using 67″ net wrap:
| Brand | Models (Representative) |
|---|---|
| John Deere | 592 (wide spec) |
| New Holland | Roll-Belt 680 |
| Vermeer | 654 Super (wide) |
| Fendt | Rotana 160 V (wide NA) |
| Massey Ferguson | 2270 XD |
Key facts about 67″ net wrap:
- Widest standard North American net wrap size
- Same roll length as 64″ — 7,000 ft (2,134 m) per roll
- Produces the largest round bales in the North American segment
- Less commonly stocked — advance ordering recommended
- Best for large-scale commercial operations with appropriate handling equipment
Who should choose 67″ net wrap: Operators running the largest round baler configurations available, typically on commercial-scale farming or contracting operations where maximum output per pass is the priority.
All Four Sizes at a Glance
| Size | Width (cm) | Roll Length | Bale Width | Availability | Best For |
|---|---|---|---|---|---|
| 48″ | 122 cm | 9,840 ft / 3,000 m | 48″ | ★★★★★ Widest | Standard NA balers — most common |
| 51″ | 130 cm | 9,840 ft / 3,000 m | 51″ | ★★★★☆ Wide | Mid-large NA balers |
| 64″ | 163 cm | 7,000 ft / 2,134 m | 64″ | ★★★☆☆ Moderate | Large-format balers |
| 67″ | 170 cm | 7,000 ft / 2,134 m | 67″ | ★★☆☆☆ Limited | Maximum-size balers |
Beyond Width: Other Specifications That Matter
Choosing the correct width is the first step — but there are three other specifications that determine whether a net wrap roll will perform well in your operation.
Net Weight (GSM)
Net wrap is sold in different weights, measured in grams per square meter (g/m²). Heavier net wrap provides greater tensile strength and tighter bale compression — particularly important for dense crops like alfalfa and corn stalks.
| Net Weight | Best Application |
|---|---|
| 7 g/m² | Light-duty dry grass hay, ideal conditions |
| 8 g/m² | Standard general-purpose hay and forage |
| 9 g/m² | Dense crops, alfalfa, heavier baling demands |
| 10 g/m² | High-output commercial operations |
| 12 g/m² | Premium heavy-duty and demanding conditions |
For most North American hay operations, 8 g/m² is the standard choice. For alfalfa or heavier crops, stepping up to 9 g/m² is a practical investment.
Material: 100% New HDPE + UV Stabilized
Always choose net wrap manufactured from 100% new (virgin) HDPE with UV stabilizers built into the material. Virgin HDPE ensures consistent tensile strength across the full roll. UV stabilizers protect both the net wrap during baling in direct sunlight and the bale during outdoor storage — preventing the wrap from becoming brittle and failing over time.
Avoid net wrap where the raw material sourcing is unclear — recycled or mixed HDPE material produces inconsistent performance and is a false economy when the crop inside the bale is worth far more than the cost of the net wrap.
Roll Length
For 48″ and 51″ widths, the standard roll is 9,840 ft (3,000 m). For 64″ and 67″ widths, the standard is 7,000 ft (2,134 m). Longer rolls mean fewer changeovers per field — worth considering for high-volume operations where downtime is costly. Custom roll lengths are available from manufacturers for operations with specific requirements.
Where to Source Your Net Wrap — Retail vs. Factory Direct
Agricultural Retail and Dealer Supply
The traditional route for most North American farmers is purchasing net wrap through agricultural retailers, co-operatives, or equipment dealers. This provides convenient access to familiar brands and local purchasing relationships.
Pros:
- Local availability and easy access
- Familiar brand options
- Can purchase single rolls as needed
Cons:
- Pricing reflects full retail distribution chain
- Fixed specifications — limited ability to customize weight or roll length
- Seasonal stock constraints, especially for 64″ and 67″ sizes
Verdict: Convenient for small operations or occasional purchases. For farms buying multiple rolls per season, the distribution markup adds up significantly.
Direct from a Net Wrap Manufacturer
Sourcing net wrap directly from a professional net wrap manufacturer removes every layer of distribution cost and delivers factory pricing to the buyer. All four standard North American widths — 48″, 51″, 64″, and 67″ — are available from quality manufacturers with full specification flexibility.
Pros:
- Factory-direct pricing — typically 30–50% lower than retail channels
- Full specification control across width, weight, roll length, and color
- Consistent supply for all four sizes, including less-common 64″ and 67″ widths
- Private label manufacturing available for distributors and co-ops
- Volume pricing for multi-roll seasonal supply
Cons:
- Minimum order quantities apply — best suited to operations buying in volume
- Requires direct engagement with the manufacturer
Verdict: The most cost-efficient approach for any operation purchasing more than a few rolls per season — and the only route that gives you full control over specification.
Xinhui Netting — All Four Standard Sizes from the Factory
Xinhui Netting is a professional net wrap manufacturer based in China, producing all four standard North American net wrap widths — 48″, 51″, 64″, and 67″ — and supplying farms, agricultural co-operatives, and distributors worldwide at factory-direct pricing.
With extensive OEM manufacturing experience and full production flexibility, we deliver consistent, UV-stabilized HDPE net wrap across every standard size and weight, with custom specification options available for operations with specific requirements.
Why North American Buyers Choose Xinhui Netting
All four standard sizes in stock — 48″, 51″, 64″, and 67″ are all standard production lines at Xinhui Netting — not special orders. Consistent availability year-round.
100% New HDPE + UV Stabilized — Every roll, every width, every weight is manufactured from virgin HDPE with integrated UV stabilizers for consistent field and storage performance.
Multiple weight options — Choose 7, 8, 9, 10, or 12 g/m² across all widths to match your crops and conditions exactly.
Factory-direct pricing — No dealer margin, no distributor markup. Genuine manufacturing cost pricing for farms and distributors buying direct.
Full customization — Need a non-standard roll length, a specific color, or a custom weight? We manufacture to order.
Private label manufacturing — Distributors and co-operatives can source any width under their own brand name. Full white-label service available.
Xinhui Netting — North American Net Wrap Size Specifications
Standard North American Sizes — Full Range
| Width | Length | Net Weight Options | Compatible With |
|---|---|---|---|
| 48″ (122 cm) | 9,840 ft (3,000 m) | 7 / 8 / 9 / 10 / 12 g/m² | Standard NA round balers — widest compatibility |
| 51″ (130 cm) | 9,840 ft (3,000 m) | 7 / 8 / 9 / 10 / 12 g/m² | Mid-large NA round balers |
| 64″ (163 cm) | 7,000 ft (2,134 m) | 7 / 8 / 9 / 10 / 12 g/m² | Large-format round balers |
| 67″ (170 cm) | 7,000 ft (2,134 m) | 7 / 8 / 9 / 10 / 12 g/m² | Maximum-size round balers |
European Market Sizes (Also Available)
| Width | Length |
|---|---|
| 1.23 m | 2,000 m / 3,000 m |
| 1.25 m | 2,000 m / 3,000 m |
| 1.30 m | 3,600 m |
Japan Market Sizes (Also Available)
| Width | Length |
|---|---|
| 0.75 m | 1,000 m |
| 0.90 m | 2,000 m |
| 1.05 m | 2,000 m |
| 1.22 m | 2,000 m |
Full Customization Options
| Parameter | Options |
|---|---|
| Width | 50 cm, 1.23 m, 1.25 m, 1.30 m, 1.62 m, 1.70 m — or custom |
| Length | 1,000 m / 2,000 m / 3,000 m / 3,600 m / 4,000 m / 5,000 m — or custom |
| Net Weight | 7 / 8 / 9 / 10 / 12 g/m² |
| Material | 100% new HDPE + UV stabilized |
| Color | White, Green, Blue, Yellow — or custom |
Frequently Asked Questions
Q: What is the most common net wrap size in North America? A: The 48 inch (122 cm) net wrap is the single most common size in North America, used on the largest installed base of round balers on the continent. If you’re purchasing net wrap for a standard North American round baler and are unsure of the size, 48 inches is the most likely specification — but always verify in your baler’s operator manual before ordering.
Q: How do I know which net wrap size my baler needs? A: Check your round baler’s operator manual — it will specify the correct net wrap width for your model. You can also contact your equipment dealer or check the manufacturer’s website. The bale chamber width and the net wrap width should match exactly.
Q: Can I use 48 inch net wrap on a baler that requires 51 inches? A: No. Using the wrong width will result in incomplete bale coverage — the edges of the bale will be left unwrapped. This exposes the bale to weather and reduces its storage life. Always use the width specified for your baler.
Q: Why is the roll length shorter for 64″ and 67″ sizes? A: Because the rolls are wider, keeping the same length as 48″ or 51″ rolls would make them excessively heavy and difficult to handle. The standard 7,000 ft (2,134 m) roll length for 64″ and 67″ widths keeps roll weight at a manageable level for one or two-person handling during changeover.
Q: What net wrap weight should I use for hay baling? A: For standard hay baling, 8 g/m² is the most widely used weight and performs well across typical North American conditions. For denser crops like alfalfa or corn stalks, stepping up to 9 g/m² provides extra strength and more consistent bale tension.
Q: Is factory-direct net wrap the same quality as branded net wrap? A: Yes, when sourced from a professional manufacturer using 100% new HDPE with UV stabilizers. Xinhui Netting produces net wrap to the same material specification as leading branded products. Many branded net wrap rolls sold in North America are manufactured in China. The material standard is what determines performance — not the label on the packaging.
Q: Does Xinhui Netting supply all four standard sizes — 48″, 51″, 64″, and 67″? A: Yes. All four standard North American widths are standard production lines at Xinhui Netting, available in multiple weights and roll lengths. Contact us for pricing and availability.
Q: What is the minimum order quantity from Xinhui Netting? A: Minimum order quantities depend on specification and destination. Contact us directly for a quote — we work with individual farms, co-operatives, and distributors across a range of volume levels.
Q: Do you offer private label net wrap in all four standard sizes? A: Yes. We offer complete white-label and private label manufacturing across all widths for distributors and retailers who want to market net wrap under their own brand.
Q: What colors are available? A: Standard colors are White, Green, Blue, and Yellow. Custom colors are available for private label production on request.
Conclusion: The Right Size, the Right Spec, the Right Price
Choosing the correct net wrap size for your round baler — whether that’s 48″, 51″, 64″, or 67″ — is the foundation of efficient, reliable baling. Get the width right, pair it with the correct net weight for your crop, and source it from a manufacturer using 100% new HDPE with UV stabilization, and your baling operation will run smoothly from the first bale of the season to the last.
Xinhui Netting produces all four standard North American net wrap sizes — along with European and Japanese market specifications — and supplies them factory-direct to farms, co-operatives, and distributors worldwide. If you’re ready to take the distribution markup out of your net wrap cost, contact us today for a direct quote on the sizes and specifications your operation needs.
Contact Xinhui Netting — Factory-Direct Net Wrap Manufacturer
Changzhou Xinhui Netting Co., Ltd. Professional Net Wrap Manufacturer | OEM & Private Label | Factory Direct Pricing
📧 : sale1@xinhuibalenetwrap.com 🌐 : xinhuibalenetwrap.com
Request a Free Quote Today →
Supplying farms, co-operatives, and distributors across North America, Europe, Japan, Australia, and worldwide.
