Krone Comprima V180: Why Your Net Wrap Tracks Left — and the One Bolt That Fixes It
If you own a Krone Comprima V180 round baler, you’ve probably experienced this frustrating issue: the net wrap tracks to the left, leaving uneven coverage on the right side of the bale. This is an extremely common problem on the V180 series, and in most cases, it can be fixed by adjusting just one bolt.
Why Your Net Wrap Keeps Pulling Left on Krone Comprima V180
The Krone Comprima V180 uses a net wrapping system with tension arms and guide rollers. When the net tracks left, it usually means the net feed is not perfectly centered or the tension is uneven.
Most common root causes:
- Left-side tension arm out of alignment (most frequent)
- Net guide roller height or angle incorrect
- Uneven pre-stretch on left vs right side
- Worn or loose pivot bolt on the tension arm
After helping dozens of V180 owners, we found that 90% of left-tracking issues are caused by a single adjustment point.
The One Bolt That Usually Fixes It
Location: The main pivot bolt on the left net tension arm (driver’s side when facing the back of the baler).
How to fix it:
- Locate the large pivot bolt on the left tension arm assembly.
- Loosen the lock nut (usually 19mm or 22mm).
- Slightly rotate the tension arm clockwise (about 1/4 to 1/2 turn) to increase tension on the left side.
- Tighten the lock nut and test with one bale.
- If still pulling left, repeat with another small clockwise adjustment.
Most operators report the net centers perfectly after 1–3 small adjustments on this bolt.
Additional Checks If the Bolt Adjustment Doesn’t Fully Solve It
- Check that both left and right net guide rollers are at the same height.
- Ensure the net roll is loaded straight and the core is not damaged.
- Verify pre-stretch settings are equal on both sides.
- Clean any built-up debris or plastic residue from the rollers and tension arms.
Pro Tip for Krone Comprima V180 Owners
Using a high-quality, consistent bale net wrap with uniform edge strength and tight winding tolerance makes a big difference. Cheap or inconsistent net amplifies any small mechanical misalignment, making the left-tracking problem worse.
Our heavy-duty round bale net wrap is manufactured with tight GSM tolerance and consistent roll tension, which helps reduce tracking issues even on sensitive balers like the Comprima V180.
Final Recommendation
Before replacing expensive parts or calling a technician, try adjusting that one left tension arm pivot bolt first. In most cases, it solves the problem in under 10 minutes.
Frequently Asked Questions
Why does my Krone Comprima V180 net wrap track to the left?
The most common reason is misalignment of the left tension arm. A small adjustment to the main pivot bolt on the left side usually corrects the tracking issue.
Which bolt should I adjust on the Krone Comprima V180 for net wrap tracking?
The main pivot bolt on the left net tension arm. Loosening the lock nut and turning it slightly clockwise (1/4 to 1/2 turn) often solves the left-pull problem.
How much should I turn the tension arm bolt?
Start with a small 1/4 turn clockwise. Run a test bale and make additional small adjustments if needed. Most cases are fixed within 1/2 turn total.
Will using a different brand of net wrap solve the tracking problem?
High-quality, consistent net wrap can reduce the issue, but mechanical adjustment of the tension arm is the primary fix. Uniform net with good edge strength performs better on the V180.
How often should I check the tension system on my Krone Comprima V180?
Inspect and lubricate the pivot points every 1,000 bales and perform a full check at the beginning of each season to prevent recurring tracking problems.
XinHui Bale Net Wrap – Reliable Performance for Krone Balers
Changzhou Xinhui Netting Co., Ltd. Professional Net Wrap Manufacturer | OEM & Private Label | Factory Direct Pricing
📧 : sale1@xinhuibalenetwrap.com
🌐 : https://xinhuibalenetwrap.com
Request a Free Quote Today →
Supplying farms, co-operatives, and distributors across North America, Europe, Japan, Australia, and worldwide.
